FIRSTINFO A1102USY5 Patented 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation with Extra 3.5 x 4.5mm Hose & Sealing Cap
Original price was: $94.90.$85.90Current price is: $85.90.
Price: $94.90 - $85.90
(as of Nov 28,2024 22:04:35 UTC – Details)
Product Description
FIRSTINFO Auto Fluid Changer Pump Series
Capacity
6.5 L 6.5 L 6.5 L 10.5 L 10.5 L 15 L
B Tube ( 7.8 x 9.8 mm, 3.28 Feet )
✓
✓
✓
✓
✓
✓
C Tube ( 5.3 x 6.7 mm, 3.28 Feet )
✓
✓
✓
✓
✓
✓
D Tube + Wire ( 4.0 x 6.0 mm, 3.28 Feet )
✓
✓
✓
✓
✓
✓
E Tube ( 3.5 x 4.5 mm, 3.28 Feet )
✓
✓
✓
✓
✓
✓
Brake Bleeding Hose ( Fit Most Standard and ABS Brake Systems )
✓
✓
Hose Storage Unit ( Keep Your Hoses Well Stored )
✓
✓
✓
✓
✓
✓
Dust-Proof Sealing Cover ( Avoid Spillage and Dust)
✓
✓
✓
✓
✓
✓
Operation Mode
Manual Manual / Pneumatic Manual / Pneumatic Manual / Pneumatic Manual / Pneumatic Manual / Pneumatic
FIRSTINFO Patented 6.5 Liter Pneumatic Oil Extractor/Vacuum Pump Manual Fluid Extractor
Exclusive Features
Upgraded Storage Design
The sealing cover cap allows you to transport the full unit everywhere without spillage. Hose storage unit collects the tubes together to keep the tubes and your garage clean. Also ensures no more missing tubes.
Safety Lock
The safety lock design seals the spout securely, ensuring safe operation.
Noise Reduction Nut
Reduce the noise and release the excessive pressure automatically.Pressure balance design provides more safety when using.
Patented Products
Please identify FIRSTINFO Manual/Pneumatic Oil extractor Pump– with patent authentication.US Patent Number: 8360741
Excellent Design
Extension Tube to Reach The Bottom Oil Pan
Suck up all drop of fluid in the bottom of it by attaching the extension tube to the main hose (B: Ø 7.8 x 9.8 mm).Make sure the tubes are all connected tightly.
Extra Ø 3.5 x 4.5mm Thinnest Tube
3.5 x 4.5 mm Exclusive Designed for the needs of extracting oil through the small dipstick tubes.Connect the main hose (B: Ø 7.8 x 9.8 mm) with extension hose C or D or E to reach bottom of your oil pan.
Limited Line
The eagle mouth designed spout makes it fluent to pour and prevents spilling out.Do Not extract oil over the limit line on the oil extractor to prevent overflow.
Air Control Valve for Easily Operation
Easy to operate the air control vale to open or close the air supply.Please close the air inlet valve while operating in manual mode.
Instruction
Step 1. Install The Tube
Connect the main hose (B: Ø 7.8 x 9.8 mm) counterclockwise with the oil extractor.Choose an extension nylon tube hose with a suitable diameter to attach to the main hose.Please make sure they are all connected tightly. To suck up every drop of oil down to the bottom of the reservoir.
Attention
Cool down the engine at least 15 minutes after driving. If the car was not used in the last 4 hours, warm it up for at least 3 minutes before extraction.
Step 2. Start To Extract Oil / Two-Way Mode
Pneumatic Operation-Connect the extractor to air compressor and turn it on. The pneumatic action provides a higher speed. Set the operating pressure between 40-170 psi.Manual Operation-Start pumping manually. The manual action requires no other equipment to work with.
Step 3. Uninstall The Tube After Extraction
Press the decompression valve to release the negative pressure.Remove the hose clockwise.
Step 4. Pour Out the Oil / The Fluid Should NOT Be Over the Limit Line
There is a limit line on the tank. If the fluid goes over the limit line, it might flow into the vacuum chamber and cause leaking from bottom.Noted that the fluid should not be over the limit line to prevent any spilling and leaking.Pour out the old fluid out in the recycling station.
【Replacing Hose Available & Hose Storage w/ Sealing Cap】– With the storage hose to collect oil hoses easily after using, and sealing cap to avoid any dust and dirt, and also can prevent the liquid from spillage during transport. The hoses can be purchased individually.
【Dual-Mode】–The pneumatic mode for higher speed of oil change; just need to connect with air compressor. Manual mode requires no other equipment; easy to do the oil / fluid changing for DIY. No need to lift up or crawl under the car to drain out the oil.
【Speedy Extraction】–Fast suction and extraction speed of 1.6~1.8L /min.. Extracts engine oil in a 4-cylinder car within few minutes in pneumatic mode. And leaves no mess to clean afterward.
【No Oil Left】–With 4 sizes of tubes which can go into the bottom of oil pan. Nylon oil hoses B: 7.8×9.8mm X 1M C:5.3×6.7mm X 1M D:4x6mm X 1M E:3.5×4.5mm X1M; B hose can be connected to (C,D or E ) hose and it will extend to 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
【No Limit】– No limit to any places; perfect for working on vehicles anytime and anywhere, and for aquarium. To extract the engine oil, brake fluid, ATF fluid and other fluid of motorcycles, vehicles, lawn mower, boat, jet ski etc.
User Reviews
Be the first to review “FIRSTINFO A1102USY5 Patented 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation with Extra 3.5 x 4.5mm Hose & Sealing Cap”
Related Products
Original price was: $94.90.$85.90Current price is: $85.90.
There are no reviews yet.